Specific Heat Capacity

Derive the expression for $C_p-C_v$.

 A heater melts $0°\mathrm{C}$ ice in a bucket completely into water in $6$ minutes and then evaporates all that water into steam in$47$ minutes $30$ sec. If latent heat of fusion of ice is $80 \mathrm{cal} {\mathrm{g}}^{-1}$, latent heat of steam will be (specific heat of water is $1\mathrm{cal} {\mathrm{g}}^{-1}{ }^{\circ }{\mathrm{C}}^{-1}$)?

A metal cube absorbs $2100.0 \mathrm{J}$ of heat when its temperature is raised by $2 °\mathrm{C}$. If the specific heat of the metal is $900 \mathrm{J} {\mathrm{kg}}^{-1} {\mathrm{K}}^{-1}$, then the mass of the cube is

An immersion heater is rated $836 \mathrm{W}$. It should heat $1$ litre of water from $10°\mathrm{C}$ to $40°\mathrm{C}$ in about. (Specific heat of water is $1 \mathrm{cal} {\mathrm{g}}^{-1} °{\mathrm{C}}^{-1}$, density of water is $1 \mathrm{g} {\mathrm{cm}}^{-3}$)

The volume of $n$ moles of an ideal gas with degree of freedom $f$ is varied according to the law $V=\frac{a}{T}$ where $a$ is a constant. The molar specific heat of the gas at constant pressure is

Derive Mayer's formula  $C_p-C_v=R$

A diatomic gas expands from $(V_0, \mathrm{2}{P}_0)$ to $(\mathrm{2}{ V}_0, P_0)$ as shown in the P-V graph. For this process choose the correct statement

The piston is massless and the spring is ideal and initially streched the piston cylinder arrangement encloses an ideal gas. If the gas is heated quasistatically the $PV$ graph.

A $U$-tube, made of heat- insulating material, is shown in figure. One limb is closed by a non- conducting cork, the temperature is $T_0=300 K$. How much heat (in multiples of $100$ Joule) is required to be given by the coil so that the air rises to a temperature $T=510 K$? The thermal expansion of mercury is negligible. (Take:
Area of the tube as $0.1{ \mathrm{m}}^2,{\rho }_{\mathrm{Hg}}=13.6 \mathrm{g} {\mathrm{cc}}^{-1}; {\mathrm{P}}_{\mathrm{atm}}=75 \mathrm{cm}$ of $Hg,R=\frac{25}{3}$ SI units). Neglect the heat flow through the mercury.

An ideal gas which undergoes through a process $V=a{T}^2;$ starting at $T_0$ and ends at $2T_0$. $a$ is a constant. The molar heat capacity of the gas if it is monoatomic is $\frac{n}{2}R$; What is $n$ ?

Define one calorie. How it is related to joule?

An ideal diatomic gas of $n$ moles and with initial pressure $P$ and volume $V$ undergoes a thermodynamic process. In this process the pressure is directly proportional to volume and the rms speed of the molecules is doubled. Then, the amount of heat required in this process is

Define $1 \mathrm{calorie}$ of heat. What is the relation between Joule and calorie?

At a given temperature, the specific heat of a gas at constant pressure is always greater than its specific heat at constant volume.

Molar specific heat at constant pressure $C_P$ is related to internal energy $U$ and absolute temperature $T$ as $C_P=$________

An insulated box containing a diatomic gas of molar mass $M$ is moving with velocity $v$. The box is suddenly stopped. The resulting change in temperature is $\frac{m{v}^2}{fR}$. What will be the value of $f$?

If ${\mathrm{S}}_{\mathrm{P}}$ and ${\mathrm{S}}_{\mathrm{V}}$ denote the specific heats of nitrogen gas per unit mass at constant pressure and constant volume respectively, then

Define molar specific heat capacity at constant volume and pressure.

A container has 4.2 litres of water at $40 {}^{°}\mathrm{C}$. Heat required to boil water in $\mathrm{kJ}$ is

The amount of heat required to raise the temperature of $1 \mathrm{kg}$ mass of water through $1 \mathrm{K}$ is called its