Embibe Experts Solutions for Chapter: Rotational Mechanics, Exercise 3: Exercise-3

Author:Embibe Experts

Embibe Experts Physics Solutions for Exercise - Embibe Experts Solutions for Chapter: Rotational Mechanics, Exercise 3: Exercise-3

Attempt the free practice questions on Chapter 10: Rotational Mechanics, Exercise 3: Exercise-3 with hints and solutions to strengthen your understanding. Beta Question Bank for Engineering: Physics solutions are prepared by Experienced Embibe Experts.

Questions from Embibe Experts Solutions for Chapter: Rotational Mechanics, Exercise 3: Exercise-3 with Hints & Solutions

MEDIUM
JEE Main/Advance
IMPORTANT

A turning moment of 100 Nm is applied to a shaft which passes through a wheel of radius R=50cm. The force with which brakes must be applied to the wheel (see figure) so that the wheel does not rotate is...... ×102 N. The coefficient of friction equals 0.25.

Question Image

MEDIUM
JEE Main/Advance
IMPORTANT

A cylinder of mass 5 kg and radius 30 cm, and free to rotate about its axis, receives an angular impulse of 3 kg m2 s-1 initially followed by a similar impulse after every 4 s. What is the angular speed (in rad/sec) of the cylinder after 30 s of the initial impulse(write the value to the nearest integer)? The cylinder is at rest initially.

HARD
JEE Main/Advance
IMPORTANT

A uniform rod of mass 8m and length 6a is lying on a horizontal table. Two point masses m and 2m moving with speed 2v and v respectively strike the rod and stick to it as shown in the figure. Kinetic energy of the system after collision is given by α×mv2. The value of α is

Question Image

HARD
JEE Main/Advance
IMPORTANT

A stick of length L and mass M lies on a frictionless horizontal surface on which it is free to move in anyway. A ball of mass m moving with speed v as shown in fig. Mass of the ball so that it remains at rest immediately after collision is ML2 L2+Kd2. The value of K is.

Question Image

MEDIUM
JEE Main/Advance
IMPORTANT

A rod of length l and mass M held vertically is let go down, without slipping at the point of contact. Velocity of the top end at the time of touching the ground is v. Find the value of v2gl

HARD
JEE Main/Advance
IMPORTANT

A light rod carries three equal masses A, B and C as shown in figure. Velocity of B in vertical position of rod, if it is released from horizontal position as shown in figure is V. Value of 7 V2gl.

Question Image

HARD
JEE Main/Advance
IMPORTANT

An initial momentum is imparted to a homogeneous cylinder as a result of which it begins to roll without slipping up an inclined plane at speed v0=4 ms-1. The plane makes an angle of 30° with the horizontal. What time (in sec) does the cylinder take before stopping.

EASY
JEE Main/Advance
IMPORTANT

As shown in the figure, a rod moves with v=2 m s-1 and rotates with ω=2π rad s-1. The point on the rod whose velocity is zero in this frame is at a distance βπ m below the centre of mass. Write the value of β.

Question Image