Embibe Experts Solutions for Chapter: Electrochemistry, Exercise 1: AP EAPCET 2021 (19-Aug Afternoon)

Author:Embibe Experts

Embibe Experts Chemistry Solutions for Exercise - Embibe Experts Solutions for Chapter: Electrochemistry, Exercise 1: AP EAPCET 2021 (19-Aug Afternoon)

Attempt the practice questions on Chapter 24: Electrochemistry, Exercise 1: AP EAPCET 2021 (19-Aug Afternoon) with hints and solutions to strengthen your understanding. EMBIBE CHAPTER WISE PREVIOUS YEAR PAPERS FOR CHEMISTRY solutions are prepared by Experienced Embibe Experts.

Questions from Embibe Experts Solutions for Chapter: Electrochemistry, Exercise 1: AP EAPCET 2021 (19-Aug Afternoon) with Hints & Solutions

MEDIUM
AP EAPCET
IMPORTANT

At 291 K, saturated solution of BaSO4 was found to have a specific conductivity of 3.648×10-6ohm-1 cm-1 and that of water being used is 1.25×10-6ohm-1 cm-1. If the ionic conductance's of Ba2+ and SO42- are 110 and 136.6ohm-1 cm2 mol-1 respectively, the solubility of BaSO4 at 291 K will be [Atomic masses ofBa-137,S-32,0-16

MEDIUM
AP EAPCET
IMPORTANT

CuSO4 solution is electrolysed for 15 minutes to deposit 0.4725 g of copper at the cathode. The current in amperes required is (Faraday =96,500Cmol-1, atomic weight of copper =63)

MEDIUM
AP EAPCET
IMPORTANT

For the oxidation of 0.2 M FeSO4 solution 0.965 amperes current is passed through it for 1 hour. The volume of the solution that is oxidised in mL is

EASY
AP EAPCET
IMPORTANT

When a current of 10 A is passes through molten AlCl3 for 1.608 minutes. The mass of Al deposited will be [Atomic mass of Al=27 g]:-

MEDIUM
AP EAPCET
IMPORTANT

Find the emf of the following cell reaction, given ECr3+/cr2+0=-0.72 V and EFe2+/Fe=0-0.42 V at 25°C is CrCr3+(0.1M)Fe2+(0.1M)Fe

MEDIUM
AP EAPCET
IMPORTANT

For Cr2O72-+14H++6e-yields2Cr3++7H2O,E0=1.33 V at Cr2O72-=4.5 millimole, Cr3+=1.5 millimole and E=1.067 V, then calculate the pH of the solution.

MEDIUM
AP EAPCET
IMPORTANT

If hydrogen electrons dipped in two solutions of pH=3 and pH=6 are connected by a salt bridge, the emf of the resulting cell is

MEDIUM
AP EAPCET
IMPORTANT

The molar conductivities λm0 at infinite dilution of KBr, HBr and KNH2 are 120.5,420.6 and 90.48 S cm2 mol-1 respectively. Find the value of λm0 for NH3.