Umakant Kondapure, Collin Fernandes, Nipun Bhatia, Vikram Bathula and, Ketki Deshpande Solutions for Chapter: Elasticity, Exercise 4: Evaluation Test

Author:Umakant Kondapure, Collin Fernandes, Nipun Bhatia, Vikram Bathula & Ketki Deshpande

Umakant Kondapure Physics Solutions for Exercise - Umakant Kondapure, Collin Fernandes, Nipun Bhatia, Vikram Bathula and, Ketki Deshpande Solutions for Chapter: Elasticity, Exercise 4: Evaluation Test

Attempt the practice questions on Chapter 13: Elasticity, Exercise 4: Evaluation Test with hints and solutions to strengthen your understanding. MHT-CET TRIUMPH Physics Multiple Choice Questions Part - 1 Based on Std. XI & XII Syllabus of MHT-CET solutions are prepared by Experienced Embibe Experts.

Questions from Umakant Kondapure, Collin Fernandes, Nipun Bhatia, Vikram Bathula and, Ketki Deshpande Solutions for Chapter: Elasticity, Exercise 4: Evaluation Test with Hints & Solutions

MEDIUM
MHT-CET
IMPORTANT

Calculate the force F needed to punch a 1.46 cm diameter hole in a steel plate 1.27 cm thick. The ultimate shear strength of steel is 345 MN m-2.

Question Image

 

MEDIUM
MHT-CET
IMPORTANT

A metal wire of length L1 and area of cross section A is attached to a rigid support. Another metal wire of length L2 and of the same cross-sectional area is attached to free end of the first wire. A body of mass M is then suspended from the free end of the second wire. If Y1 and Y2 are the Young's moduli of the wires respectively, the effective force constant of the system of two wires is

EASY
MHT-CET
IMPORTANT

The shear modulus of lead is 2×109 Pa. A cubic lead slab of side 50 cm is subjected to a shearing force of magnitude 9×104 N on its narrow face. The displacement of upper edge is Δl

Question Image

HARD
MHT-CET
IMPORTANT

What internal pressure in the absence of external pressure can be sustained by a glass spherical flask if in both the cases, wall thickness is equal to Δr=1mm and radius of tube and the flask equals r=25 mm? (S=493SI units)

HARD
MHT-CET
IMPORTANT

A steel cylindrical rod of length l and radius r is suspended by its end from the ceiling. Find the elastic deformation energy U of the rod.

HARD
MHT-CET
IMPORTANT

A horizontally oriented copper rod of length l=1 m is rotated about a vertical axis passing through its middle. What is the number of r.p.s. at which this rod ruptures? Breaking or rupture strength of copper is σ and density of copper is ρ.

HARD
MHT-CET
IMPORTANT

What work has to be performed to make a hoop out of a steel band of length l, width h and thickness δ? The process is assumed to proceed within the elasticity range of the material.

EASY
MHT-CET
IMPORTANT

A catapult is stretched with a force of 100 N which changes the length of the band from 10 cm to 14 cm. Find the velocity with which a stone of mass 1 kg will leave the catapult when aimed at a mango.