EASY
JEE Main
IMPORTANT
Earn 100

A capacitor of capacitance 500 μF is charged completely using a DC supply of 100 V. It is now connected to an inductor of inductance 50 mH to form an LC circuit. The maximum current in LC circuit will be _____ A.

50% studentsanswered this correctly

Important Questions on Electromagnetic Induction and Alternating Currents

MEDIUM
JEE Main
IMPORTANT
A conducting loop of radius 10π cm is placed perpendicular to a uniform magnetic field of 0.5 T. The magnetic field is decreased to zero in 0.5 s at a steady rate. The induced emf in the circular loop at 0.25 s is:
MEDIUM
JEE Main
IMPORTANT

In the circuit shown in the figure, the ratio of the quality factor and the band width is _____ s.

Question Image

MEDIUM
JEE Main
IMPORTANT

A metallic rod of length L is rotated with an angular speed of ω normal to a uniform magnetic field B about an axis passing through one end of rod as shown in figure. The induced emf will be :

Question Image.

EASY
JEE Main
IMPORTANT

Three identical resistors with resistance R=12 Ω and two identical inductors with sell inductance L=5 mH are connected to an ideal battery with emf of 12 V as shown in figure. The current through the battery long after the switch has been closed will be________A.

Question Image

EASY
JEE Main
IMPORTANT
In an LC oscillator, if values of inductance and capacitance become twice and eight times, respectively, then the resonant frequency of oscillator becomes x times its initial resonant frequency ω0. The value of x is:
EASY
JEE Main
IMPORTANT
An LCR series circuit of capacitance 62.5 nF and resistance of 50 Ω, is connected to an A.C. source of frequency 2.0 kHz. For maximum value of amplitude of current in circuit, the value of inductance is ____mH.(Take π2=10
EASY
JEE Main
IMPORTANT
A wire of length 1 m moving with velocity 8 m s-1 at right angles to a magnetic field of 2 T. The magnitude of induced emf, between the ends of wire will be ___________.
EASY
JEE Main
IMPORTANT
A series LCR circuit is connected to an AC source of 220 V, 50 Hz. The circuit contains a resistance R=80 Ω, an inductor of inductive reactance XL=70 Ω, and a capacitor of capacitive reactance XC=130 Ω. The power factor of circuit is x10. The value of x is: