EASY
Earn 100

A current of 2.34 A flows in resistance of 11.111111 Ω. The potential difference across the given resistance with due regard for the significant figure is

10% studentsanswered this correctly

Important Questions on Physical World and Measurement

MEDIUM
The final result of the sum of the numbers 523.32,1.21524 and 107.3 rounded to correct significant figures is
EASY
The area of a rectangular field (in m2) of length 55.3 m and breadth 25 m after rounding off the value for correct significant digits is:
EASY
The number of significant figures in 0.07800 is
MEDIUM
The diameter and height of a cylinder are measured by a meter scale to be 12.6±0.1cm and 34.2±0.1cm, respectively. What will be the value of its volume in appropriate significant figures?
MEDIUM
Taking into account of the significant figures, what is the value of 9.99 m0.0099 m?
MEDIUM
The percentage errors in quantities P, Q, R and S are 0.5%, 1%, 3% and 1.5% respectively in the measurement of a physical quantity A= P 3 Q 2 R S . The maximum percentage error in the value of A will be:
EASY
A body accelerates from rest with a uniform acceleration a for a time t. The uncertainty in 'a' is 8% and the uncertainty in 't' is 4%. The uncertainty in the speed is
EASY

A physical quantity P is described by the relation P=a12 b2 c3d-4. If the relative errors in the measurement of a, bc and d respectively, are 2%, 1%, 3% and 5%. Then the relative error in P will be:

MEDIUM
The length and diameter of a cylinder are measured to be 10.1031 cm and 2.0935 cm respectively. The volume of the cylinder to an appropriate significant figures is
EASY
Order of magnitude of a physical quantity is the
MEDIUM
If one takes into account the finite mass of the proton, the correction to the binding energy of the hydrogen atom is approximately (mass of proton =1.60×10-27kg, mass of an  electron =9.10×10-31kg )
MEDIUM
The area of a square is 5.29 cm2. The area of 7 such squares taking into account the significant figures is:
MEDIUM
In an experiment, the mass of an object is measured by applying a known force on it, and then measuring its acceleration. If in the experiment, the measured values of applied force and the measured acceleration are F=10.0±0.2 N and a=1.00±0.01 m s-2, respectively, the mass of the object is
EASY
If NA,NB and NC are the number of significant figures in A=0.001204 m, B=43120000 m,  and C=1.200 m respectively then
MEDIUM
The length and width of a rectangular room are measured to be 3.95±0.05 m and 3.05±0.05 m , respectively, the area of the floor is
EASY
A cylindrical wire has a mass (0.3±0.003) g, radius (0.5±0.005) mm and length (6±0.06) cm. The maximum percentage error in the measurement of its density is
MEDIUM
In a simple pendulum experiment for determination of acceleration due to gravity (g), time taken for 20 oscillations is measures by using a watch of 1 second least count. The mean value of time taken comes out to be 30 s. The length of the pendulum is measured by using a meter scale of least count 1 mm and the value obtained is 55.0 cm. The percentage error in the determination of g is close to
EASY
The distance of a circle is 2.486 m. Its area with due regard to signifiant figures is (Given π=3.142)
MEDIUM
For the four sets of three measured physical quantities as given below. Which of the following options is correct?
i A1=24.36,B1=0.0724,C1=256.2
ii A2=24.44,B2=16.082,C2=240.2
iii A3=25.2,B3=19.2812,C3=236.183
iv A4=25,B4=236.191,C4=19.5
MEDIUM
In an experiment on a simple pendulum to determine the acceleration due to gravity, the student measures the length of the thread as 63.2 cm and diameter of the pendulum bob as 2.256 cm. The student should take the length of the pendulum to be