A student performed the experiment of determination of focal length of a concave mirror by $u-v$ method using an optical bench of length 1.5 m. The focal length of the mirror used is 24 cm. The maximum error in the location of the image can be 0.2 cm. The 5 sets of $\left(u, v\right)$ values recorded by the student (in cm) are : (42, 56), (48, 48), (60, 40), (66, 33), (78, 39). The data set(s) that cannot come from experiment and is (are) incorrectly recorded, is (are)

A hemispherical glass body of radius 10 cm and refractive index 1.5 is silvered on its curved surface. A small air bubble is 6 cm below the flat surface inside it along the axis. The position of the image of the air bubble made by the mirror is seen :

A point object is moving uniformly towards the pole of a concave mirror of focal length $25 \mathrm{cm}$ along its axis as shown below. The speed of the object is $1 {\mathrm{ms}}^{-1}$. At $t=0$, the distance of the object from the mirror is $50 \mathrm{cm}$. The average velocity of the image formed by the mirror between time $t=0$ and $t=0.25 \mathrm{s}$ is:

A spherical mirror is obtained as shown in the figure from a hollow glass sphere, if an object is positioned in front of the mirror, what will be the nature and magnification of the image of the object? (Figure down as schematic and not to scale)