MEDIUM
KVPY Aptitude Test - Stream SX
IMPORTANT
Earn 100

Aluminium oxide may be electrolysed at 1000C to furnish the aluminium metal (At. Mass =27 amu1 Faraday =96,500 Coulombs). The cathode reaction is Al3++3e-Al. To prepare 5.12 kg of aluminium metal by this method, If 5.49×10y C electricity would be required. then value of y will be.

50% studentsanswered this correctly

Important Questions on Electrochemistry

MEDIUM
KVPY Aptitude Test - Stream SX
IMPORTANT
A concentrated solution of lead nitrate in water can be stored in:
HARD
KVPY Aptitude Test - Stream SX
IMPORTANT
In a Daniel cell in operation:
HARD
KVPY Aptitude Test - Stream SX
IMPORTANT

The cell potential of an electrochemical cell with the cell reaction Zn+2Ag+0.0001 MZn2+0.1 M+2Ag, is:

Given that the standard cell potential is 1.56 V.

HARD
KVPY Aptitude Test - Stream SX
IMPORTANT

Consider the following electrochemical cell:

Zns+2Ag+0.04 MZn2+0.28 M+2Ags

If Eocell=2.57 , then the e.m.f. of the cell at 298 K, is:

HARD
KVPY Aptitude Test - Stream SX
IMPORTANT
The values of the limiting molar conductivity Λ° for NaCl, HCl and NaOAc are 126.4, 425.9 and 91.0 S cm2 mol-1, respectively. For HOAc. Λ° in S cm2 mol -1 is
HARD
KVPY Aptitude Test - Stream SX
IMPORTANT
If, E°Fe2+/Fe=-0.440 V and E°Fe3+/Fe2+=0.770 V, then E°Fe3+/Fe is:
HARD
KVPY Aptitude Test - Stream SX
IMPORTANT
The standard electrode potential of Zn2+/Zn is -0.76 V, and that of Cu2+/Cu is 0.34 V. The emf (V) and the free energy change kJ mol-1, respectively, for a Daniel cell will be
HARD
KVPY Aptitude Test - Stream SX
IMPORTANT
The density and equivalent weight of a metal are 10.5 g cm-3 and 100, respectively. The time required for a current of 3 amp to deposit a 0.005 mm thick layer of the same metal on an area of 80 cm2 is closest to