EASY
JEE Advanced
IMPORTANT
Earn 100

An electric immersion heater of 1.08 kW is immersed in water. After it has reached a temperature of 100°C, how much time will be required to produce 100 g of steam? 1 Cal=4.2 J

50% studentsanswered this correctly

Important Questions on Heating Effects of Current

EASY
JEE Advanced
IMPORTANT
Two electric bulbs A and B are rated 60 W and 100 W, respectively. If they are connected in parallel to the same source, then,
EASY
JEE Advanced
IMPORTANT
A 25 W, 220 V bulb and a 100 W, 220 V bulb are connected in series across a 220 V line. Which electric bulb glows more brightly?
MEDIUM
JEE Advanced
IMPORTANT
Two identical heaters rated 220 V,1000 W are placed in series with each other across 220 V line, then the combined power is
MEDIUM
JEE Advanced
IMPORTANT
The figure shows three similar lamps L1, L2 and L3 connected across a power supply. If the lamp L3 fuses, how will the light emitted by L1 and L2 change?
Question Image
MEDIUM
JEE Advanced
IMPORTANT
If a wire of resistance 20 Ω is covered with ice and a voltage of 210 V is applied across the wire, then the rate of melting of ice is (Lice=80 cal g-1)
MEDIUM
JEE Advanced
IMPORTANT
A factory is served by a 220 V supply line. In a circuit protected by a fuse marked 10 A, the maximum number of 100 W  lamps in parallel that can be turned on is
MEDIUM
JEE Advanced
IMPORTANT
It takes 16 min to boil some water in an electric kettle. Due to some defect, it becomes necessary to remove 10% turns of the heating coil of the kettle. After repairs, how much time will it take to boil the same mass of water?
EASY
JEE Advanced
IMPORTANT
A 100 W bulb designed to operate on 100 V is connected across a 500 V source. Find the resistance to put in series so that bulb consumes 100 W only.