MEDIUM
Earn 100

Co-efficient of volumetric expansion for ideal gas decreases with increase in temperature.

50% studentsanswered this correctly

Important Questions on Thermal Properties of Matter

HARD
A pendulum clock loses 12 s a day if the temperature is 40o C and gains 4s a day if the temperature is 20o C. The temperature at which the clock will show correct time, and the co-efficient of linear expansion α of the metal of the pendulum shaft are respectively:
MEDIUM
A rod, of length L at room temperature and uniform area of cross section A, is made of a metal having coefficient of linear expansion α /°C It is observed that an external compressive force F is applied on each of its ends, prevents any change in the length of the rod when its temperature rises by T K Young's modulus, Y for this metal is:
MEDIUM

When the temperature of a metal wire is increased from 0ºC to 10ºC, its length increases by 0.02%.The percentage change in its mass density will be closed to:

HARD
The ends Q and R of two thin wires, PQ and RS, are soldered (joined) together. Initially each of the wires has a length of 1 m at 10°C. Now the end P is maintained at 10°C, while the end S is heated and maintained at 400°C. The system is thermally insulated from its surroundings. If the thermal conductivity of wire PQ is twice that of the wire RS and the coefficient of linear thermal expansion of PQ is 1.2×10-5 K-1, the change in length of the wire PQ is
HARD
A leak proof cylinder of length 1 m, made of a metal which has very low coefficient of expansion is floating vertically in water at 0 oC such that its height above the water surface is 20 cm. When the temperature of water is increased to 4 oC, the height of the cylinder above the water surface becomes 21 cm. The density of water at T = 4 oC, relative to the density at T = 0 oC is close to:
EASY
A horizontal steel railroad track has a length of 100 m when the temperature is 25°C. The track is constrained from expanding or bending. The stress on the track on a hot summer day, when the temperature is 40°C, is (Note: The linear coefficient of thermal expansion for steel is 1.1×10-5/C and the Young's modulus of steel is 2×1011 Pa
EASY
A steel rod at 25°C is observed to be 1 m long when measured by another metal scale which is correct at 0°C. The exact length of steel rod at 0°C is αsteel=12×10-6 °C-1, αmetal=20×10-6 °C-1
MEDIUM
The pressure that has to be applied to the ends of a steel wire of length 10 cm to keep its length constant when its temperature is raised by 100 °C is :
(For steel, Young's modulus is 2×1011 N m-2 and coefficient of thermal expansion is 1.1×10-5 K-1)
EASY
A Bakelite beaker has volume capacity of 500 cc at 30 °C. When it is partially filled with Vm volume (at 30°C) of mercury, it is found that the unfilled volume of the beaker remains constant as temperature is varied. If γbeaker =6×10-6 °C-1, γmercury =1.5×10-4 °C-1, where γ is the coefficient of volume expansion, then  Vm (in cc ) is close to
MEDIUM
An ideal gas is expanding such that PT= constant. The coefficient of volume expansion of the gas is
EASY
Two different wires having lengths L1 and L2 and respective temperature coefficient of linear expansion α1 and α2, are joined end-to-end. Then the effective temperature coefficient of linear expansion is :
MEDIUM
A non-isotropic solid metal cube has coefficients of linear expansion as: 5× 10 5 / o C along the x-axis and 5× 10 6 / o C along the y and the z-axis. If the coefficient of volume expansion of the solid is C× 10 6 / o C , then the value of C is _____________
MEDIUM
The coefficient of linear expansion of crystal in one direction is α1 and that in every direction perpendicular to it is α2. The coefficient of cubical expansion is
EASY

A bimetallic strip consists of metals A and B. It is mounted rigidly as shown. The metal A has higher coefficient of expansion compared to that of metal B. When the bimetallic strip is placed in a cold both, it will :

Question Image

EASY
Each side of a box made of metal sheet in cubic shape is a at room temperature T, the coefficient of linear expansion of the metal sheet is α. The metal sheet is heated uniformly, by a small temperature ΔT, so that its new temperature is T+ΔT. Calculate the increase in the volume of the metal box.
MEDIUM
A compressive force, F is applied at the two ends of a long thin steel rod. It is heated, simultaneously, such that its temperature increases by ΔT. The net change in its length is zero. Let l be the length of the rod, A its area of cross-section, Y its Young's modulus, and α its coefficient of linear expansion. Then, F is equal to:
EASY
Coefficient of linear expansion of brass and steel rods are α1 and α2. Lengths of brass and steel rods are l1 and l2, respectively. If l2-l1 is maintained the same at all temperatures, which one of the following relations holds good?
EASY
A copper rod of 88 cm and an aluminum rod of unknown length have their increase in length independent of increase in temperature. The length of aluminum rod is αCu=1.7×10-5 K-1andαAl=2.2×10-5K-1