EASY
NEET
IMPORTANT
Earn 100

If in a series LCR AC circuit, the rms voltage across L, C and R are V1, V2 and V3 respectively, then the voltage of the source is always: 

50% studentsanswered this correctly

Important Questions on Alternating Current

EASY
NEET
IMPORTANT

In the series LCR circuit as shown in figure, the voltmeter and ammeter readings are :

Question Image

MEDIUM
NEET
IMPORTANT
An A.C. voltage source of variable angular frequency ω and fixed amplitude V connected in series with a capacitance C and an electric bulb of resistance R (inductance zero). When ω is increased,
 
EASY
NEET
IMPORTANT
In a circuit, L,C and R are connected in series with an alternating voltage source of frequency f. The current leads the voltage by 45°. The value of C is ?
HARD
NEET
IMPORTANT
In an LCR series A.C. circuit, the voltage across each of the components inductor L, capacitor C and resistor R is 50 V. The voltage across the L.C. combination will be,
EASY
NEET
IMPORTANT
The phase difference between the alternating current and emf is π2. Which of the following cannot be the constituent of the circuit?
EASY
NEET
IMPORTANT
An alternating voltage E=2002sin100t is connected to a 1 micro farad capacitor through an AC ammeter. The reading of the ammeter shall be:
MEDIUM
NEET
IMPORTANT
A 0.21 H inductor and a 88 Ω resistor are connected in series to a 220 V50 Hz AC source. The current in the circuit and the phase angle between the current and the source voltage are respectively.(Use π=227)
HARD
NEET
IMPORTANT
An LCR series circuit with 100 Ω resistance is connected to an AC source of 200 V and angular frequency 300 radians per second. When only the capacitance is removed, the current lags behind the voltage by 60°. When only the inductance is removed, the current leads the voltage by 60°. Then, the current and power dissipated in LCR circuit are, respectively