MEDIUM
Earn 100

In a CE amplifier, the input ac signal to be amplified is applied across.

50% studentsanswered this correctly

Important Questions on Semiconductor Devices

EASY

The typical output characteristics curve for a transistor working in the common-emitter configuration is shown in the figure.

Question Image

The estimated current gain from the figure is

EASY
If the base and collector of a transistor is in forward bias, then it can not be used as
MEDIUM
Two amplifiers are connected one after the other in series (cascaded). The first amplifier has a voltage gain of 10 and the second has a voltage gain of 20. If the input signal is 0.01 volt, what is the output ac signal?
MEDIUM

Draw a labelled diagram of a common emitter amplifier, showing waveforms of signal voltage and output voltage.

HARD

Question Image

In the circuit shown, the value of β of the transistor is 48. If the supplied base current is 200 μA, what is the voltage at the terminal Y?

MEDIUM
For a common emitter transistor amplifier, the output voltage across the collector resistance of 2  is 2 V. If the current amplification factor β=100. Find the input signal voltage. The base resistance is 1 .
EASY
A transistor works as an amplifier when,
EASY
Draw the output characteristic curves for an n-p-n transistor in a C_E configuration and find the output resistance from it.
MEDIUM
A common emitter transistor amplifier is connected with a load resistance of 6 . When a small AC signal of 15 mV is added to the base-emitter voltage, the alternating base current is 20 μA and the alternating collector current is 1.8 mA. What is the voltage gain of the amplifier?
EASY
For a CE transistor amplifier the audio signal voltage across the collector resistance of 2kΩ is 2 V. The current amplification factor of the transistor is 100 . If the base resistance is 1kΩ, the input signal voltage and base current are respectively
HARD

Draw a labelled circuit diagram of a transistor acting as a common emitter amplifier. What is meant by phase reversal?

MEDIUM

In a common emitter amplifier, the input resistance and output resistance are 200Ω and 500Ω respectively. If the voltage gain of the amplifier is 50, then the power gain is

EASY
Draw circuit diagram for a NPN-transistor to obtain characteristic curves in common base configuration. Establish a relation between current amplification factors for a transistor in common base and common emitter configuration.
EASY

What are the advantages of negative feedback amplifier?

 

MEDIUM

If α=0.99 for a CE transistor amplifier circuit. The input resistance is equal to 1  and the load resistance is equal to100   to , the voltage gain of the circuit is 

:

MEDIUM

The circuit diagram shows a transistor as an amplifier :

Question Image

Why is this configuration of transistor known as common emitter configuration ?

HARD
How a n-p-n transistor is used as an amplifier. Show with its circuit diagram
EASY
In a CE amplifier, the input ac signal to be amplified is applied across
MEDIUM
In a common base mode of a transistor, the collector current is 5.488 mA for an emitter current of 5.60 mA. The value of the base current amplification factor β will be
EASY
For a transistor amplifier, the voltage gain