EASY
KCET (UG)
IMPORTANT
Earn 100

In a hydraulic lift , F1 and F2 are the force acting on the small piston and large piston having radii r1 and r2 respectively, then

50% studentsanswered this correctly

Important Questions on Fluid Mechanics

EASY
KCET (UG)
IMPORTANT
One ton stone is put on a larger piston of diameter 40 cm of a hydraulic lift and a pressure P has to be applied on the smaller piston of diameter 2 cm, to lift the stone. The pressure P, is approximately
EASY
KCET (UG)
IMPORTANT

A scientist stated the following law: "Pressure applied to an enclosed fluid is transmitted undiminished to every point of the fluid and the walls of containing vessel". Who is that scientist?

MEDIUM
KCET (UG)
IMPORTANT
A cubical block of side 0.5 m floats on water with 30% of its volume under water. What is the maximum weight that can be put on the block without fully submerging it under water?
[Take, density of water  =103 kg/m3 ]
EASY
KCET (UG)
IMPORTANT
A vessel contains oil (density=0.8 g cm-3) over mercury (density=13.6 g cm-3). A uniform sphere floats with half its volume immersed in mercury and the other half in oil. The density of the material of the sphere (in g cm-3) is
MEDIUM
KCET (UG)
IMPORTANT
A metallic sphere floats in an immiscible mixture of water ρw=103 kg m-3 and a liquid ρL=13.5×103 kg m-3 with 15 portion by volume in the liquid. The density of the metal is 
EASY
KCET (UG)
IMPORTANT
In order that a floating object be in a stable equilibrium, its centre of buoyancy should be _____.
MEDIUM
KCET (UG)
IMPORTANT
An ice-berg of density 900 kg m-3 is floating in water of density 1000 kg m-3. The percentage of volume of ice-berg outside the water is 
EASY
KCET (UG)
IMPORTANT
A block of wood floats in water with (4/5)th of its volume submerged. If the same block just floats in a liquid, the density of liquid in kg m-3 is