HARD
MHT-CET
IMPORTANT
Earn 100

Out of the following graphs, which graph shows the correct relation (graphical representation) for LC parallel resonant circuit? 

50% studentsanswered this correctly

Important Questions on Electromagnetic Induction

EASY
MHT-CET
IMPORTANT
In Karnataka, the normal domestic power supply AC is 220 V, 50 Hz. Here 220 V and 50 Hz refer to:
MEDIUM
MHT-CET
IMPORTANT
The network shown in figure is a part of the circuit. (The battery has negligible resistance.)
Question Image

At a certain instant, the current I=2 A and it is decreasing at the rate of102 A s-1. What is the potential difference between the points B and A?
HARD
MHT-CET
IMPORTANT
A branch of a circuit is shown in the figure. If current is decreasing at the rate of 103 A s-1, the potential difference between A and B is:Question Image
HARD
MHT-CET
IMPORTANT
An electric current has both D.C. and A.C. components. D.C. component of 8 A and A.C. component is given as I=6sinωt A. So RMS value of resultant current is:
EASY
MHT-CET
IMPORTANT
The peak value of an alternating e.m.f. given by e=e0cosωt is 10 V and its frequency is 50 Hz. At time t=1600 s, the instantaneous e.m.f. is.... 
EASY
MHT-CET
IMPORTANT
In an A.C. circuit, I=100sin200πt. The time required for the current to achieve its peak value will be:
 
MEDIUM
MHT-CET
IMPORTANT
A rectangular coil ABCD is rotated anticlockwise with a uniform angular velocity about the axis shown in the diagram below. The axis of rotation of the coil as well as the magnetic field B, are horizontal and perpendicular to each other. The induced e.m.f. in the coil would be maximum when [MP PMT 1992, 94, 99; Haryana CEET 1996]
Question Image,
MEDIUM
MHT-CET
IMPORTANT
A conducting circular loop is placed in a uniform magnetic field 0.04 T with its plane perpendicular to the magnetic field. The radius of the loop starts shrinking at 2 mm s-1. The induced e.m.f. in the loop when the radius is 2 cm will be.... [CBSE PMT 2009]