EASY
NEET
IMPORTANT
Earn 100

The current and voltage in a circuit is given by, i=3.5 sin(628t+30°) A, V=28 sin (628t  30°) V.  The phase difference between voltage and current.  
  

Important Questions on Alternating Current

MEDIUM
NEET
IMPORTANT

The figure given below shows the variation of an alternating emf with time. What is the average value of the emf for the shaded part of the graph? 
Question Image

EASY
NEET
IMPORTANT
A voltage V=60sinπt volt is applied across a 20 Ω resistor. What will an ac ammeter in series with the resistor read? 
MEDIUM
NEET
IMPORTANT
An alternating current source E=100 sin(1000t) V is connected through an inductor of 10 μH then write down the equation of current.
EASY
NEET
IMPORTANT
An alternating voltage E=2002sin (100t) V is applied to 2 H inductor through an a.c. ammeter. What will be reading of the ammeter?
EASY
NEET
IMPORTANT
A 15.0 μF capacitor is connected to a 220 V, 50 Hz source. Find the capacitive reactance and the current (RMS and peak) in the circuit. If the frequency is doubled, what happens to the capacitive reactance and the current?
EASY
NEET
IMPORTANT
A 60 μF capacitor is connected to a 110 V, 60 Hz A.C. supply. Determine the rms value of the current in the circuit. 
MEDIUM
NEET
IMPORTANT
When a series combination of inductance and resistance are connected with a 10 V 50 Hz AC source, a current of 1 A flows in the circuit. The voltage leads the current by a phase angle of π/3 radian. Calculate the values of resistance and inductance.
MEDIUM
NEET
IMPORTANT
Calculate the impedance of a condenser in order to run a bulb rated at 10 W, 60 V when connected in series to an A.C. source of 100 V