EASY
11th West Bengal Board
IMPORTANT
Earn 100

The percentage error in the measurement of mass and speed are 2% and 3% respectively. The error in the measurement of kinetic energy obtained by measuring mass and speed will be

50% studentsanswered this correctly

Important Questions on Measurement and Physics

EASY
11th West Bengal Board
IMPORTANT
A simple pendulum completes 20 oscillations in 25 s. The time is measured by a stopwatch if least count 0.2 s . The error in measurement of time is:
EASY
11th West Bengal Board
IMPORTANT
When a current of (2.5±0.5) A flows through a wire, it develops a potential difference of  (20±1) V, the resistance of the wire is
 
EASY
11th West Bengal Board
IMPORTANT
The length and breadth of a metal sheet are 3.124 m and 3.002 m respectively. The area of this sheet upto four correct significant figure is :
EASY
11th West Bengal Board
IMPORTANT
Two resistances are expressed as R1=(4± 0.5) Ω and  R2=(12± 0.5) Ω. What is the maximum absolute error when they are connected in series ?
EASY
11th West Bengal Board
IMPORTANT
The radius of a thin wire is 0.16 mm. The area of cross-section taking significant figure into consideration in square millimeters is?
EASY
11th West Bengal Board
IMPORTANT
The density of a cube is measured by measuring its mass and the length of its sides. If the maximum errors in the measurement of mass and length are 4% and 3%, respectively, then find the maximum error in the measurement of the density of cube.
EASY
11th West Bengal Board
IMPORTANT
If a current of  2.33 A is passed through a resistance of 10.485 Ω, the potential is 24.43005 V. Its value in proper significant figures would be.
EASY
11th West Bengal Board
IMPORTANT
If the length of the pendulum is (0.8±0.01) m and time period is (2.5±0.12) s, then the percentage error in acceleration due to gravity will be :