EASY

Earn 100

Unit of stress and strain is same

50% studentsanswered this correctly

Important Questions on Mechanical Properties of Solids

HARD

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

A lift is tied with thick iron ropes having mass

M

. The maximum acceleration of the lift is ‘

a m s^{- 2}

and maximum safe stress is

S N m^{- 2}

. The minimum diameter of the rope is

EASY

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

Define Poisson’s ratio.

MEDIUM

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

In an experiment, brass and steel wires of length

1 m

each with areas of cross section

1 m m^{2}

are used. The wires are connected in series and one end of the combined wire is connected to a rigid support and other end is subjected to elongation. The stress required to produce a net elongation of

0.2 m m

is,
[Given, the Young's Modulus for steel and brass are, respectively,

120 \times 10^{9} N / m^{2}

and

60 \times 10^{9} N / m^{2}

]

EASY

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

The speed of the water in a river is

V

near the surface. If the coefficient of viscosity of water is

η

and the depth of the river is

H

, then the shearing stress between the horizontal layers of water is

HARD

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

A mild steel wire of length $2 L$ and cross-sectional area $A$ is stretched, well with in the elastic limit, horizontally between two pillars as shown in figure. A mass $m$ is suspended from the mid-point of the wire. Strain in the wire is

Question Image

MEDIUM

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

A wire of length

1 m

and radius

2 mm

is vertically clamped. The lower end is twisted through an angle of

45 °

. The angle of shear is _____

EASY

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

A man grows into a giant such that his linear dimensions increase by a factor of

9 .

Assuming that his density remains same, the stress in the leg will change by a factor of:

MEDIUM

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

Consider two wires of same material having their ratio of radii to be

2 : 1

. If these two wires are stretched by equal force, the ratio of stress produced in them is :

EASY

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

The length of metallic wire is

l_{1}

when tension in it is

T_{1}

. It is

l_{2}

when the tension is

T_{2}

. The original length of the wire will be :

EASY

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

A uniform metallic wire is elongated by

0.04 m

when subjected to a linear force

F .

The elongation, if its length and diameter is doubled and subjected to the same force will be _________

cm .

HARD

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

A string of a material of length

1 m,

cross-sectional area

0.2 {cm}^{2}

requires

2000 N

to extend it by

1 mm

. The same material is used to manufacture the legs of a robot of

50 cm

length and of cross-sectional area

0.5 {cm}^{2}

each. The mass of the robot is

50 kg

. When it jumps from a building of height

h

, it experiences a strain

0.05 .

The maximum height through which the robot can jump without breaking its legs is

(g = 10 m s^{- 2})

EASY

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

A cube of metal is subjected to a hydrostatic pressure

4 GPa

. The percentage change in the length of the side of the cube is close to : (Given bulk modulus of metal,

B = 8 \times 10^{10} Pa

)

EASY

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

Two wires

A

and

B

are stretched by the same load. If the area of cross-section of wire '

A

' is double that of

^{'} B^{'}

, then the stress on '

B

' is

EASY

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

A

and

B

are two wires. The radius of

A

is twice that of

B

. They are stretched by the same load. Then the stress on

B

EASY

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

If a tensile force is suddenly removed from a wire then its temperature will

MEDIUM

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

A wire is stretched such that its volume remains constant. The Poisson’s ratio of the material of the wire is:

MEDIUM

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

The elastic limit of brass is

379 M P a

. The minimum diameter of a brass rod if it is to support a

400 N

load without exceeding its elastic limit will be

MEDIUM

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

A rubber (eraser)

3 cm \times 1 cm \times 8 cm

is clamped at one end with

8 cm

edge vertical. A horizontal force of

2.4 N

is applied at the free end (the top face). If the shear modulus of the rubber is

1.6 \times 10^{5} {Nm}^{- 2}

, then the horizontal displacement of the top face will be

MEDIUM

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

The length of a metal wire is

l_{1}

when the tension in it is

T_{1}

and is

l_{2}

when the tension is

T_{2}

. The natural length of the wire is,

EASY

Physics>Mechanical Properties of Matter>Mechanical Properties of Solids>Stress and Strain

A steel wire having a radius of

2.0 m m

, carrying a load of

4 k g,

is hanging from a ceiling. Given that

g = 3.1 π m s^{- 2},

what will be the tensile stress that would be developed in the wire?

Unit of stress and strain is same

Important Questions on Mechanical Properties of Solids

Learn and Prepare for any exam you want !