EASY
NEET
IMPORTANT
Earn 100

Water flows through a frictionless duct with a cross-section varying as shown in figure. Pressure P at points along the axis is represented by: 

Question Image

50% studentsanswered this correctly

Important Questions on Fluid Mechanics

MEDIUM
NEET
IMPORTANT
A tank of height 5 m is full of water. There is a hole of cross-sectional area 1 cm2 in its bottom. The initial volume of water that will come out from this hole per second is: 
EASY
NEET
IMPORTANT
The pressure of water in a water pipe when tap is opened and closed is respectively 3 × 105 N/m2 and 3.5 × 105 N/m2 .With open tap the velocity of water flowing is:
EASY
NEET
IMPORTANT
The flow speeds of air on the lower and upper surfaces of the wing of an aeroplane are v and 2v, respectively. The density of air is p and the surface area of the wing is A. The dynamic lift on the wing is:
MEDIUM
NEET
IMPORTANT
An incompressible fluid flows steadily through a cylindrical pipe which has radius 2R at point A and radius R at point B, further along the flow direction. If the velocity at point A is v, its velocity at point B will be:
EASY
NEET
IMPORTANT
Water is flowing through a non-uniform radius tube. If the ratio of the radius of entry and exit end of the pipe is 3:2, then the ratio of velocities of entering and exit liquid is:-
MEDIUM
NEET
IMPORTANT
An aeroplane of mass 3×104 kg and total wing area of 120 m2 is in a level flight at some height. The difference in pressure between the upper and lower surface of its wings in kilo pascals is (g=10 ms-2)
EASY
NEET
IMPORTANT
Bernoulli’s equation for steady, non-viscous, incompressible flow expresses the