HARD
Earn 100

What do you mean by force? Discuss in brief the various types of forces.

Important Questions on Laws of Motion

EASY
Electric as well as gravitational affects can be thought to be caused by fields. Which of the following is true for an electrical or gravitational field?
MEDIUM

A boy throws a cricket ball from the boundary to the wicket keeper. If the frictional force due to air fa cannot be ignored, the forces acting on the ball at the position X are represented by

Question Image

EASY
A magnet of weight 2N is placed on a non-magnetic horizontal table of weight 20N.Another magnet of identical geometry is kept on the underside of the table top and aligned exactly with the upper magnet but with opposite polarity.The magnetic force on the lower magnet due to the upper one is thrice the weight of the lower magnet. If this magnetic force is 6N,then
EASY
When the intermolecular distance decreases due to compressive force, there is
HARD
A rope of length L and uniform linear density is hanging from the ceiling. A transverse wave pulse, generated close to the free end of the rope, travels upwards through the rope. Select the correct option.
HARD
System shown in the figure is in equilibrium and at rest. The spring and string are massless, now the string is cut. The acceleration of mass 2m and m just after the string is cut will be
Question Image
EASY
Which of the following statement is correct?
EASY
Consider the following statements about the four fundamental forces in nature.
(i) The strong nuclear force binds protons and neutrons in a nucleus.
(ii) The strong nuclear force is about 103 times the electromagnetic force in strength.
(iii) The weak nuclear force is the weakest of all the four fundamental forces.
(iv) The range of the weak nuclear is about 10-16 m
The correct statement(s) is (are)
MEDIUM

Two masses connected in series with two massless strings are hanging from a support as shown in the figure. Find the tension in the upper string

Question Image

EASY

The length of a metal wire is 1, when the tension in it is T1 and is 2 when the tension is T2. The natural length of the wire is:

EASY
Three blocks A, B and C, of masses 4 kg, 2 kg 1 kg and respectively, are in contact on a frictionless surface, as shown. If a force of 14 N  is applied on the 4 kg block, then the contact force between A and B is:

Question Image
MEDIUM
An automobile moving with a speed of 36 km h-1 reaches an upward inclined road of angle 30°, its engine becomes switch off. If the coefficient of friction is 0.1, then how much distance will automobile move before coming to rest?
MEDIUM
One end of a massless spring of spring constant k and natural length l0 is fixed while the other end is connected to a small object of mass m lying on a frictionless table. The spring remains horizontal on the table. If the object is made to rotate at an angular velocity ω about an axis passing trough fixed end, then the elongation of the spring will be
EASY
Question Image
What is the maximum force F that can be applied on block m1, so that both m1 & m2 will move together? There is no friction between m1 and the horizontal table. The coefficient of friction between 'm1' and 'm2' is μ.
EASY

As shown in the figure, an iron block A of volume 0.25 m3 is attached to a spring S of unstretched length 1.0 m and hanging to the ceiling of a roof. The spring gets stretched by 0.2 m. This block is removed and another block B of iron of volume 0.75 m3 is now attached to the same spring and kept on a frictionless incline plane of 30° inclination. The distance of the block from the top along the incline at equilibrium is

Question Image

EASY

Three forces of magnitude 6 N, 6 N and 72 N act at a cormer of a cube along three edges of a cube, as shown in the figure. The resultant of the three forces is

Question Image

EASY
Force of friction and tension in a string are ___________ in origin
EASY
A book is lying on a table. What is the angle between the normal reaction acting on the book on the table and the weight of the book?
HARD

A maximum of 3 N force can be applied on a block, down the incline, that would still not move the block which is placed on a rough inclined plane as shown in the figure. The maximum external force up the inclined plane that does not move the block is 12 N. The coefficient of static friction between the block and the plane is Take g=10 m s-2

Question Image

EASY

Two blocks A and B are placed one over the other on a smooth horizontal surface. The maximum horizontal force that can be applied on lower block A, so that A and B move without separation is 49 N. The coefficient of friction between A and B is

Question Image