HARD
Earn 100

What do you understand by buckling in beams?

Important Questions on Mechanical Properties of Solids

EASY
The area of cross section of the rope used to lift a load by a crane is 2.5×10-4 m2. The maximum lifting capacity of the crane is 10 metric tons. To increase the lifting capacity of the crane to 25 metric tons, the required area of cross section of the rope should be
(take g=10 ms-2)
MEDIUM
A wire is stretched such that its volume remains constant. The Poisson’s ratio of the material of the wire is:
MEDIUM
While constructing buildings and bridges a pillar with distributed ends is preferred to a pillar with rounded ends. Why?
EASY

Let a steel bar of length l, breadth b and depth d be loaded at the centre by a load W. Then the sag of bending of the beam is (Y=Young's modulus of material of steel).

EASY
A steel bar of length l, breadth b, and depth d loaded at the centre by a load W. The sag δ of c.g is given by
HARD
Explain why the maximum height of a mountain on earth is approximately 10 km
HARD
The expression for the sag produced in a beam when it is loaded at the center is given by
HARD
Which of the following expressions can be used to calculate the maximum height of mountains on earth?
MEDIUM
Explain why steel is preferred to copper, brass, aluminium in heavy-duty machines and in structural designs.
EASY
A beam of metal supported at two ends is loaded at the centre. The depression at the centre is proportional to Yn, where Y denotes Young's modulus of material. The value of n is
HARD
What shape is preferred for the beams that are used in construction of bridges? Why?
EASY
A rectangular beam of metal, supported at its two ends is loaded at the centre. If Y is Young's modulus of the material of beam then bending of the beam at the centre is proportional to
 
EASY
Which of the following relations is incorrect for the sag δ of beam?

Where, W is load, l is length of the beam, b is breadth of the beam, d is depth of the beam, Y is Young's modulus of the material of beam.