EASY
Earn 100

What is the effect of temperature on conductivity of an electrolyte. 

Important Questions on Electro Chemistry

MEDIUM
The resistance of a conductivity cell containing 0.01 MKCl solution at 298 K is 1750 Ω. If the conductivity of 0.01 MKCl solution at 298 K
is 0.152×10-3 S cm-1, then the cell constant of the conductivity cell is____×10-3 cm-1
EASY
What is the common unit of conductivity if the dimensions are expressed in centimeter?
EASY
If the resistivity of 0.1 M KCl solution is 50 Ω cm. What is its molar conductivity?
EASY
Amongst the following, the form of water with the lowest ionic conductance at 298K is:
MEDIUM
Define super conducting transition temperature.
MEDIUM
A KCl solution of conductivity 0.14 S m-1 shows a resistance of 4.19Ω in a conductivity cell. If the same cell is filled with an HCl solution, the resistance drops to 1.03Ω. The conductivity of the HCl solution is ____×10-2 S m-1. (Round off to the Nearest Integer).
EASY
The molar conductivity at infinite dilution of barium chloride, sulphuric arid and hydrochloric acid are 280, 860 426 Scm2mol-1 respectively. The molar conductivity at infinite dilution of barium sulphate is ___ Scm2 mol-1 ( Round off to the Nearest Integer).
MEDIUM
An electrolyte of a polymer-salt complex of poly (ethylene oxide) - LiCF3SO3 is shaped into a free standing circular film of 20 mm diameter and a thickness of 20μm.When it is sandwiched between 2 stainless steel circular electrodes of the same diameter, this cell exhibits a conductance of 3145 S.What is the specific conductivity of the electrolyte?
MEDIUM
What is the molar conductivity of 0·1 M NaCl if its conductivity is 1.06×10-2Ω-1 cm-1?
EASY
The value of electrical resistance at super conductivity state is
EASY
The decreasing order of electrical conductivity of the following aqueous solutions is:
A 0.1 M Formic acid,
B 0.1 M Acetic acid,
C 0.1 M Benzoic acid.
MEDIUM
Distinguish between electronic conduction and electrolytic conduction.
MEDIUM

On which of the following factor ionic conductivity of solution does not depend?

EASY
_____ are the reason for the electrical conductance of sodium chloride in molten state.
HARD

5.0 m mol dm-3 aqueous solution of KCl has a conductance of 0.55 mS when measured in a cell constant 1.3 cm-1. The molar conductivity of this solution is _______ mSm2 mol-1. (Round off to the Nearest Integer)

MEDIUM
At a particular temperature, the ratio of molar conductance to specific conductance of 0.01 M NaCl solution is
MEDIUM
The molar conductivity of a 0.5 mol dm-3 solution of AgNO3 with electrolytic conductivity of 5.76×10-3 S cm-1 at 298 K