Neha Sharma and Akanksha Dudpuri Solutions for Chapter: Chemical Effects, Exercise 3: Some Questions from NCERT

Author:Neha Sharma & Akanksha Dudpuri

Neha Sharma Science Solutions for Exercise - Neha Sharma and Akanksha Dudpuri Solutions for Chapter: Chemical Effects, Exercise 3: Some Questions from NCERT

Attempt the free practice questions on Chapter 12: Chemical Effects, Exercise 3: Some Questions from NCERT with hints and solutions to strengthen your understanding. Start Up Science solutions are prepared by Experienced Embibe Experts.

Questions from Neha Sharma and Akanksha Dudpuri Solutions for Chapter: Chemical Effects, Exercise 3: Some Questions from NCERT with Hints & Solutions

EASY
8th CBSE
IMPORTANT

Most liquids that conduct electricity are the solutions of _____, _____, _____.

EASY
8th CBSE
IMPORTANT

The passage of an electric current through a solution causes _____ (heating / magnetic / chemical) effects.

EASY
8th CBSE
IMPORTANT

The process of depositing a layer of any desired metal on another material by means of electricity is called _____.

EASY
8th CBSE
IMPORTANT

Name three liquids which when tested in the manner shown in figure may cause the magnetic needle to deflect?

Question Image

MEDIUM
8th CBSE
IMPORTANT

Does pure water conduct electricity? If not, what can we do to make it conducting?

MEDIUM
8th CBSE
IMPORTANT

In case of a fire, before the firemen use the water hoses, they shut off the main electrical supply for the area. Explain why they do this.

MEDIUM
8th CBSE
IMPORTANT

Paheli had heard that rainwater is as good as distilled water. So, she collected some rainwater in a clean glass tumbler and tested it using a tester. To her surprise, she found that the compass needle showed deflection. What could be the reasons?

MEDIUM
8th CBSE
IMPORTANT

Electroplating is used for the purification of copper. A thin plate of pure copper and a thick rod of impure copper are used as electrodes. Copper from impure rod is sought to be transferred to the thin copper plate. Which electrode should be attached to the positive terminal of battery and why?