EASY
JEE Main/Advance
IMPORTANT
Earn 100

If contact force between 2kg and 4kg is f1 and between 4kg and 6kg is f2. Find out f1f2.

Question Image 

50% studentsanswered this correctly

Important Questions on Laws of Motion

EASY
JEE Main/Advance
IMPORTANT

Two blocks of mass 2.9kg and 1.9kg are suspended from a rigid support S by two inextensible wires each of length 1m (see figure). The upper wire has negligible mass and the lower wire has a uniform mass of 0.2kgm-1. The whole system of blocks, wires and support have an upward acceleration of 0.2 ms-2. The acceleration due to gravity is 9.8ms-2. IF the tension at the midpoint of the lower and upper wires are T1 and T2 respectively. Find value of T2T1

Question Image

MEDIUM
JEE Main/Advance
IMPORTANT

A dynamometer is attached to two blocks of masses 6kg and 4kg. Forces of 20N and 10N are applied on the blocks as shown in figure. The dynamometer reading is given as x N. Find the value of x.

Question Image 

MEDIUM
JEE Main/Advance
IMPORTANT

Two block of mass 8kg and 4kg are connected by a string as shown. They are initially at rest on the floor, when a force of 100N is applied on the pulley in upward direction. If acceleration of the blocks are a1 and a2, find value of a1+a2 g=10ms-2

Question Image 

MEDIUM
JEE Main/Advance
IMPORTANT

Find force in newton which mass A exerts on mass B if B is moving towards right with 3ms-2. All surfaces are smooth and g=10ms-2

Question Image 

EASY
JEE Main/Advance
IMPORTANT
A thin rod of length 1 m is fixed in a vertical position inside a train, which is moving horizontally with constant acceleration 4 m s-2. A bead can slide on the rod, and friction coefficient between them is 1/2. If the bead is released from rest at the top of the rod, find the time in second when it will reach at the bottom. g=10 m s-2
MEDIUM
JEE Main/Advance
IMPORTANT
A light rod of length 2 m is suspended from the ceiling horizontally by means of two vertical wires of equal length tied to its ends. One of the wires is made of steel and is of cross-sectional area 0.1 sq. cm and the other is of brass of cross-sectional area 0.2 sq. cm. Find out the distance from steel wire (in metre) of position along the rod at which a weight may be hung to produce equal stresses in both wires. : Y for steel =20×1011 dyne cm-2 and Y for brass=10×1011 dyne m-2.
MEDIUM
JEE Main/Advance
IMPORTANT

A system of two blocks and a light string are kept on two inclined faces (rough) as shown in the figure below. All the required data are mentioned in the diagram. Pulley is light and frictionless. (Take g=10ms-2, sin37°=3/5) If the system is released from rest then what is the range of the tension in the string?

Question Image 

HARD
JEE Main/Advance
IMPORTANT

As shown in the figure blocks of masses M2,M and M2 are connected through a light string as shown, pulleys are light and smooth. Friction is only between block C and floor. System is released from rest. Find the acceleration of blocks A,B and C and tension in the string.

Question Image