1. Methods of Preparation of Haloalkanes:

2. Physical properties of haloalkanes:

(i) Alkyl halides are colorless with sweet smell or pleasant-smelling oily liquid. However, ${C H}_{3} F, {C H}_{3} C l, {C H}_{3} B r, {C H}_{3} {C H}_{2} F, {C H}_{3} {C H}_{2} C l$ are gaseous in nature.

(ii) Although carbon-halogen bond is polar in nature, alkyl halides are partially soluble in $H_{2} O$ .

(iii) Alkyl halides are completely soluble in organic solvents.

(iv) Boiling point $\propto$ molecular weight $\propto \frac{1}{b r a n c h i n g (f o r i s o m e r s)}$

(v) Chloroform is a pleasant-smelling liquid while iodoform is yellow crystalline solid.

(vi) Chloroform is used as an anesthetic agent.

(vii) Iodoform is more reactive than chloroform due to the large size of iodine atom.

${C H I}_{3} + {A g N O}_{3} \to A g I (y e l l o w p p t)$

${C H C l}_{3} + {A g N O}_{3} \to$ No white ppt of $A g C l$

(viii) Carbon tetrachloride is colorless liquid and used as FIRE EXTINGUISHER under the trade name PYRENE.

(ix) Chloroform is kept in dark-colored bottles to avoid the following oxidation reaction.

${C H C l}_{3} \overset{(O)}{\underset{air and light}{\to}} {C O C l}_{2}_{(P o i s o n o u s)} (P h o s g e n e) + H C l$

(x) Fluorides and chlorides are lighter than water whereas bromides and iodides are heavier than $H_{2} O$

(xi) ${C H}_{2} I_{2}$ is heaviest liquid after $H g$ .

3. Chemical Properties of Haloalkane:

4. Comparison of $S_{N} 1$ and $S_{N} 2$ reactions:

		$S_{N} 1$	$S_{N} 2$
A	Kinetics	$1^{s t}$ order	$2^{n d}$ order
B	Rate	$k [R X]$	$k [R X] [N u :^{-}]$
C	Stereochemistry	Racemization	Inversion
D	Substrate	$3 > 2 > 1 > M e X$	$M e X > 1 > 2 > 3$
E	Nucleophile	Not important	Needs Strong $N u$
F	Solvent	Faster in protic	Faster in aprotic
G	Leaving Group	Needs Good $L G$	Needs Good $L G$
H	Rearrangement	Possible	Not Possible

5. Comparison of $E_{1}$ and $E_{2}$ reactions:

		$E_{1}$	$E_{2}$
A	Kinetics	$1^{s t}$ order	$2^{n d}$ order
B	Rate	$k [R X]$	$k [R X] [B :^{-}]$
C	Substrate	$3 > 2 ≫ 1$	$3 > 2 > 1$
D	Base Strength	Not important	Needs Strong bases
E	Solvent	Good ionizing	Polarity not important
F	Leaving Group	Needs Good $L G$	Needs Good $L G$
G	Rearrangement	Possible	Not Possible

6. Identifying $S_{N} 1, S_{N} 2, E_{1}$ and $E_{2}$ mechanisms:

$R X$	Mechanism	$N u :^{-} / : B^{-}$	Solvent	Temp.
$1^{o}$	$S_{N} 2$	Better $N u :^{-}$ ${H O :}^{-}, C_{2} H_{5} O :^{-}$	Polar aprotic	Low
	$E_{2}$	Strong & bulky base ${({C H}_{3})}_{3} {C O :}^{-}$		High
$2^{o}$	$S_{N} 2$	${H O :}^{-}, C_{2} H_{5} O :^{-}$	Polar aprotic	Low
	$E_{2}$	${({C H}_{3})}_{3} {C O :}^{-}$		High
	$S_{N} 1$	Solvent	Polar protic	Low
	$E_{1}$	Solvent		High
$3^{o}$	$S_{N} 1$	Solvent	Protic	Low
	$E_{1}$	Solvent	Protic	High

7. Reactions of Grignard reagent:

Grignard reagent is the most versatile compound as it can be used in the preparation of many different types of compounds.

Grignard reagent is prepared as follows:

$R - X + M g \overset{D r y e t h e r}{\to} R - M g X$

8. Test of Chloroform (Before Anesthetic use):

Serial Number	Test	Pure $C H C l_{3}$	$[{C O C l}_{2} + H C l]$
(i)	Litmus paper	$B l u e \to B l u e$	$B l u e \to R e d$
(ii)	${A g N O}_{3}$	No ppt	White ppt $(A g C l)$
(iii)	$H_{2} {S O}_{4}$	No coloration	Yellow color

9. Preparation methods of haloarenes:

10. Chemical properties of haloarenes:

(i) Addition Elimination reaction:

The presence of electron-withdrawing substituent at ortho and/or para position is a favorable factor for the nucleophilic substitution reaction. More such substituents, the faster the reaction.

(ii) Mechanism:

(a) $S_{N} A r$ reaction takes place by a two steps mechanism.

(b) In the first step nucleophile attacks on the carbon bearing the leaving group.

(d) The carbanion is stabilized by electron-withdrawing groups in the positions ortho and para to the halogen atom.

11. Elimination Addition Reaction (Benzyne):

(i) An aromatic halide such as chlorobenzene can undergo nucleophilic substitution in presence of very strong base such as ${N a N H}_{2}$ or ${K N H}_{2}$

(ii) Substitution at the carbon that was attached to the leaving group is called direct substitution. Substitution at the adjacent carton is called cine substitution.

(iii) Mechanism:

The mechanism of reaction proceeds through benzyne intermediate.

(iv) The substituted halobenzene gives different products through benzyne formation.

(v) The major product formation can be predicted based on the inductive electronic effect of the stability of the intermediate carbanion.

12. Wurtz-Fittig Reaction:

13. Fittig Reaction:

14. Chlorobenzene to $D . D . T .$ :

Match List I (Reaction) with List II (Mechanism) and select the correct answer using the code given below the lists: List I List II P 1 SN1 Q 2 SN2 R 3 SNi S 4 SN2Ar

Important Questions on Haloalkanes and Haloarenes

Learn and Prepare for any exam you want !

Match List $I$ (Reaction) with List $II$ (Mechanism) and select the correct answer using the code given below the lists:

List I List II

P 1 $S_{N} 1$

Q 2 $S_{N} 2$

R 3 $S_{N} i$

S 4 $S_{N} 2 Ar$