EASY
MHT-CET
IMPORTANT
Earn 100

The coil of a moving coil galvanometer has 1000 turns each of area 3×10-4 m2. Its suspension fibre has restoring torque of 2×10-7 N m per degree and the radial magnetic field of induction 0.08 Wb m-2. If a current of 10 μA is passed through it, then the deflection produced is

50% studentsanswered this correctly

Important Questions on Magnetic Effect of Electric Current

EASY
MHT-CET
IMPORTANT
The resistance of a galvanometer is 90 Ω. If only 10% of the main current may flow through the galvanometer, in which way and of what value a resistor is to be used
EASY
MHT-CET
IMPORTANT
The conversion of a moving coil galvanometer into a voltmeter is done by which of the following ?
EASY
MHT-CET
IMPORTANT
The maximum current in a galvanometer can be 10 mA. It's resistance is 10Ω. To convert it into an ammeter of 1 Amp. a resistor should be connected in
EASY
MHT-CET
IMPORTANT

Torque acting on a coil is 2×10-5 N m. If the torque produces angular deflection of 10° in the coil, then the torsional rigidity of the suspension fibre (in N m/degree) connected to coil is

EASY
MHT-CET
IMPORTANT
A moving coil galvanometer has a coil with 175 turn and area 1 cm2 It uses a torsion band of torsion constant 10-6 N m rad-1. The coil is placed in a magnetic field B parallel to its plane. The coil deflects by 1° for a current of 1 mA. The value of B (in Tesla) is approximately equal to-
EASY
MHT-CET
IMPORTANT
The number of turns in a coil of Galvanometer is tripled, then
EASY
MHT-CET
IMPORTANT
The current sensitivity of moving coil galvanometer of resistance 100 Ω is 1 div/mA. Its voltage sensitivity is
EASY
MHT-CET
IMPORTANT
A galvanometer coil has a resistance 90 Ω and full scale deflection current 10 mA. A 910 Ω resistance is connected in series with the galvanometer to make a voltmeter. If the least count of the voltmeter is 0.1 V, the number of divisions on its scale is