Langmuir Adsorption Isotherm
Langmuir Adsorption Isotherm: Overview
This topic covers concepts, such as, Langmuir's Adsorption Isotherm & Comparison of Freundlich's Adsorption Isotherm with Langmuir's Adsorption Isotherm etc.
Important Questions on Langmuir Adsorption Isotherm
Differentiate between Langmuir adsorption isotherm and Freundlich adsorption isotherm.
State the major point of differences between Langmuir adsorption isotherm and Freundlich adsorption isotherm.
How Langmuir adsorption isotherm is different from Freundlich adsorption isotherm?
What is the main difference between Langmuir and Freundlich isotherms?
In the gas adsorption on a solid surface in Langmuir's model
Cotyledons are also called-
Correct equation of Langmuir adsorption isotherm is-
On the basis of Langmuir adsorption isotherm the amount of gas adsorbed at very high pressure.
Which one is correct according to Langmuir adsorption isother at very high pressure?
Which type of graph gives straight line in Langmuir adsorption isotherm?
Which type of graph gives straight line in Langmuir adsorption isotherm?
10 % sites of catalyst bed have adsorbed by. On heating gas is evolved from sites and collected at 0.03 atm and 300 K in a small vessel of 2.46 . No. of sites available is per and surface area is 1000. Find out the no. of surface sites occupied per molecule of. (Given )
A 0.016 M of an acid solution in benzene is dropped on a water surface, the benzene evaporates and the acid forms a monomolecular film of solid type. What volume of the above solution would be required to cover a 500 surface area of water with monomolecular layer of acid? Area covered by single acid molecule is 0.2.
Which of the following statements is correct about Langmuir's adsorption isotherm?
Which of the following statements is correct about Langmuir's adsorption isotherm?
In Langmuir's model of adsorption of a gas on a solid surface:
In Langmuir's model of adsorption of a gas on a solid surface:
It is observed that five hours are needed to dissolve a 1 cm cube of NaCl in large amount of water. Calculate the time required for dissolution, if the cube is ground to a power containing 1016 equal sized spheres. Assume that the rate of dissolution is directly proportional to initial area of contact between NaCl and water.
The correct expression for Langmuir adsorption isotherm is
The correct expression for Langmuir adsorption isotherm is
