Meter Bridge

IMPORTANT

Meter Bridge: Overview

This Topic covers sub-topics such as Meter Bridge, Kelvin's Method to Determine Resistance of Galvanometer, Construction of Meter Bridge, Precautions While Using Meter Bridge and, Limitation of Meter Bridge

Important Questions on Meter Bridge

EASY
IMPORTANT

In a meter bridge balance point is found at a distance   l 1  with resistances R and S as shown in the figure.

Question Image

When an unknown resistance X is connected in parallel with the resistance S, the balance point shifts to a distance l 2 . Find the expression for X in terms of   l 1 ,   l 2  and S.

EASY
IMPORTANT

AB is a uniform wire of meter bridge, across which an ideal 20 volt cell is connected as shown. Two resistor of 1 Ω and X Ω are inserted in slots of metre bridge. A cell of emf E volts and internal resistance r Ω and a galvanometer is connected to jockey J as shown.

Question Image

If E=16 voltsr= 4 Ω and the distance of balance point P from end A is 90 cm, then the value of X is

EASY
IMPORTANT

Why it's said to not slide the jockey in the meter bridge?

MEDIUM
IMPORTANT

A wire of uniform cross-section is bent in the shape of a complete ring. Two diametrically opposite points on the wire are connected to the two terminals of left gap of a metrebridge. The resistance of 15 Ω is connected in the right gap. If the null point is obtained at 70 cm from the left end of the bridge wire, find the resistance of the wire (in Ω) before bending it to a ring. 

EASY
IMPORTANT

When a metal conductor connected to the left gap of a metre bridge is heated, the balance point

MEDIUM
IMPORTANT

In the given circuit wire AB is of uniform resistance. On closing switch 2 with other two switches open, the balance length AJ is L1. On closing all the switches, the balance length AJ1 is L2. The internal resistance of the battery V is nR Ω. Find n
L1 L2=3

Question Image

EASY
IMPORTANT

In the given figure of meter bridge experiment, the balancing length AC corresponding to null deflection of the galvanometer is 40 cm. The balancing length, if the radius of the wire AB is doubled, will be _____ cm.

Question Image

EASY
IMPORTANT

In meter bridge experiment for measuring unknown resistance 'S', the null point is obtained at a distance 30 cm from the left side as shown at point D. If R is 5.6 , then the value of unknown resistance 'S' will be _____ Ω.

Question Image

MEDIUM
IMPORTANT

Resistance are connected in a meter bridge circuit as shown in the figure. The balancing length l1 is 40 cm. Now an unknown resistance x is connected in series with P and new balancing length is found to be 80 cm measured from the same end. Then the value of x will be _____ Ω.

Question Image

HARD
IMPORTANT

Consider part of meter bridge experiment. When resistances in the two gaps are R1 and R2, then balancing length from end A is 30 cm. Now 10 Ω resistances are added in both gaps then balancing length become 40 cm. Calculate

Question Image

1. R1R2

2. Value of R2 and R1

MEDIUM
IMPORTANT

In a meter bridge the point D is neutral point as shown in the figure.

Question Image

MEDIUM
IMPORTANT

How do you find the resistance of a wire using a meter bridge?

MEDIUM
IMPORTANT

What is balance point in Kelvin's method of determination of galvanometer resistance Shaalaa?

EASY
IMPORTANT

What is the use of Kelvin's method?

EASY
IMPORTANT

What is the use of Kelvin's method?

MEDIUM
IMPORTANT

What are the applications of meter bridge

MEDIUM
IMPORTANT

Why meter bridge is not suitable?

EASY
IMPORTANT

What is meter bridge?

EASY
IMPORTANT

What are the limitation of Metre bridge?

EASY
IMPORTANT

What is meter bridge made of?