Semiconductor Doping - Intrinsic and Extrinsic Semiconductors

The diagram below is showing:

Which of the following energy band diagram shows the N-type semiconductor

What will happen if we increase temperature in an intrinsic semiconductor ?

In an intrinsic semiconductor, Its carrier density increases with _____.

In an intrinsic semiconductor, Its carrier density increases with temperature.

An intrinsic semiconductor has the following properties:

1. Its electron concentration equals its hole concentration.

2. Its carrier density increases with temperature.

3. Its conductivity decreases with temperature.

Fermi energy level for intrinsic semiconductors lies at _____ of the band gap.

Fermi energy level for intrinsic semiconductors lies at middle of the band gap.

Draw energy band diagram of p & n type semiconductors. Also write two differences between p and n type semiconductors. 

Fermi energy level for intrinsic semiconductors lies.

Draw the energy band diagram when intrinsic semiconductor $\left(\mathrm{Ge}\right)$ is doped with impurity atoms of Antimony $\left(\mathrm{Sb}\right)$. Name the extrinsic semiconductor so obtained and majority charge carriers in it.

No crystal is found to be prefect at room temperature. The defects present in the crystals can be stoichiometric or non-stoichiometric. Due to nonstoichiometric defects, the formula of the ionic compound is different from the ideal formula. For example, the ideal formula of ferrous oxide should be $\mathrm{FeO}$ but actually in one sample, it was found to be ${\mathrm{Fe}}_{0.93}\mathrm{O}$. This is because the crystal may have some ferric ions in place of ferrous ions. These defects change the properties of the crystals. In some cases, defects are introduced to have crystals of desired properties as required in the field of electronics. Doping of elements of Group 14 with those of Group 13 or 15 is most common. In ionic compounds, usually impurities are introduced in which the cation has higher valency than the cation of the parent crystal, e.g., ${\mathrm{SrCl}}_2$ into $\mathrm{NaCl}$.

Which one of the following doping will produce p-type semiconductor ?

In a pure semiconductor, electric current is due to_________.

In a p–type semiconductor, the concentration of holes is$2 \times {10}^{15} {\mathrm{cm}}^{-3}$  The intrinsic carrier concentration is$2 \times {10}^{10} {\mathrm{cm}}^{-3}$ . The concentration of electrons will be.

Assertion : An n-type semiconductor has a large number of electrons but still it is electrically neutral.

 Reason : An n-type semiconductor is obtained by doping an intrinsic semiconductor with a pentavalent impurity. 

Which of the following energy band diagram shows the N-type semiconductor

The energy gap between conduction band and valence band in $\mathrm{n}-\mathrm{type}$ semiconductor is

Electric current in extrinsic semiconductor in respect of mobility is expressed as

A silicon specimen is made into a $p$-type semiconductor by doping, on an average, one indium atom per ${5\times 10}^7$ silicon atoms. If the number density of atoms in the silicon specimen is ${5\times 10}^{28}$ atoms ${\mathrm{m}}^{-3}$, then the number of acceptor atoms in silicon per cubic centimeter will be

The conductivity of a semiconductor sample having electron concentration of $5\times {10}^{18} \mathrm{electrons} {\mathrm{m}}^{-3}$, hole concentration of $5\times {10}^{19} \mathrm{holes} {\mathrm{m}}^{-3}$, electron mobility of $2.0\mathrm{ }{\mathrm{m}}^2\mathrm{ }{\mathrm{V}}^{-1}\mathrm{ }{\mathrm{s}}^{-1}$ and hole mobility of $0.01 {\mathrm{m}}^2\mathrm{ }{\mathrm{V}}^{-1}\mathrm{ }{\mathrm{s}}^{-1}$ is
(Take charge of an electron as $1.6\times {10}^{-19} \mathrm{C}$ )