Ohm's Law
Ohm's Law: Overview
This Topic covers sub-topics such as Ohm's Law, Electric Circuit, Drift Velocity, Relation between Drift Velocity and Electric Current, Mobility of Electron, Ohm's Law in Vector Form, Ohmic Resistance, Non Ohmic Resistance and, Relaxation Time of Electron
Important Questions on Ohm's Law
A wire of resistance is gradually stretched to double its original length. It is then cut into two equal parts. These parts are then connected in parallel across a battery. Find the current drawn from the battery.

Two conducting wires X and Y of same diameter but different materials are joined in series across a battery. If the number density of electrons in X is twice that in Y, find the ratio of drift velocity of electrons in the two wires would be:

Derive an expression for the resistivity of a good conductor, in terms of the relaxation time of electrons.

Two metallic wires of the same material have the same length but cross-sectional area is in the ratio . They are connected (i) in series and (ii) in parallel. Compare the drift velocities of electrons in the two wires in both the cases (i) and (ii).

The number density of free electrons in a copper conductor is How long does an electron take drift from one end of a wire 3.0 m long to its other end? The area of cross-section of the wire is and is carrying a current of 3.0 A.

A voltage of is applied across a carbon resistor with first, second and third rings of blue, black and yellow colours respectively. Calculate the value of current, in , through the resistor.

The number density of free electrons in a copper conductor is estimated at How long does an electron take to drift from one end of a wire 3.0 m long to its other end? The area of cross-section of the wire is and it is carrying a current of 3.0 A.

The relation between current and drift velocity is

A. The drift velocity of electrons decreases with the increase in the temperature of conductor.
B. The drift velocity is inversely proportional to the area of cross-section of given conductor.
C. The drift velocity does not depend on the applied potential difference to the conductor.
D. The drift velocity of electron is inversely proportional to the length of the conductor.
E. The drift velocity increases with the increase in the temperature of conductor.
Choose the correct answer from the options given below:

In the electrical network shown in the figure, the potential difference across resistance will be

The current in a copper wire is increased by increasing the potential difference between its ends. Which one of the following statements regarding the number of charge carriers per unit volume in the wire and , the drift velocity of the charge carriers is correct?

A silver wire of length and of cross-sectional area carries a current of Atomic weight and density of silver are and respectively. A silver atom contributes one free electron for conduction. Avogadro number is mole. Drift velocity of electrons in silver is, close to _______

A metal wire is subjected to a constant potential difference. When the temperature of the metal wire increases, the drift velocity of the electron in it

A conductor wire having free electrons/ carries a current of If the cross-section of the wire is then the drift velocity of electrons will be

Two cylindrical rods of uniform cross-sectional area and , having free electrons per unit volume and respectively are joined in series. A constant current flows through them in steady state. The ratio of the drift velocity of free electrons in the left rod to that of the right rod is is:

A cell of emf having an internal resistance is connected to an external resistance . The potential difference across the resistance varies with as shown by the curve,

When potential difference across a given copper wire is increase, drift velocity of charge carriers

In the figure the potential difference across resistor is . Then the potential difference between and is

The resultant flow of current in a conductor in the absence of electric field is

A cylindrical wire of radius and conductivity is subjected to an electric field of The expected value of current in the wire will be The value of is
