IES Syllabus for ECE 2019-20: The officials of UPSC will organize Engineering Service Exam for recruiting Electronics & Telecommunication Engineering graduates for various cadres under Government of India. So candidates who are appearing for UPSC IES Exam for ECE discipline must be aware of IES Syllabus for ECE. Knowing the IES Syllabus for ECE will help candidates to schedule themselves with the proper preparation plan.
So candidates who are in search of IES Syllabus For ECE can refer to this article. In this article, we will provide you with all the necessary information regarding IES Syllabus for ECE. Candidates can also download the IES Syllabus for ECE in PDF format to study in offline mode as well. Read on to find out everything about IES Syllabus for Electronics & Telecommunication Engineering.
IES Syllabus For ECE 2019
Before getting into the details of IES Syllabus for ECE, let’s have an overview of the list of Organization/Cadres under which Electronics & Telecommunication Engineering graduates will be recruited:
- Indian Railway Service of Signal Engineers
- Indian Railway Stores Service (Telecommunication/Electronics Engineering Posts)
- Indian Radio Regulatory Service Gr ‘A’
- Indian Ordnance Factories Service AWM/JTS (Electronics and Telecom Engineering Posts)
- Indian Telecommunication Service Gr ‘A’
- Indian Naval Armament Service (Electronics and Telecom Engineering Posts)
- Asstt. Naval Store Officer Grade-I(Electronics and Telecom Engg. Posts) in Indian Navy
- Junior Telecom Officer Gr ‘B’
IES Syllabus For ECE – Exam Pattern
Going through the Electronics & Telecommunication Engineering Exam Pattern will help candidates to understand the paper pattern and section-wise distribution of marks. Check IES Exam Pattern for both Prelims and Mains examination here:
IES Exam Pattern For Prelims Exam (Electronics and Telecommunication Engineering)
|Paper-I (General Studies and Engineering Aptitude)||2 Hours||200|
|Paper-II (Electronics and Telecommunication Engineering Engineering)||3 Hours||300|
IES Exam Pattern For Electronics and Telecommunication Engineering Paper 2/Mains Exam
|Paper-I ( Electronics and Telecommunication Engineering)||3 Hours||300|
|Paper-II (Electronics and Telecommunication Engineering)||3 Hours||300|
|Total||6 Hours||600 Marks|
IES Syllabus for ECE (Electronics and Telecommunication Engineering) PDF
Contents for syllabi of both the Papers together for Preliminary/Stage-I Examination (objective type Paper-II) and separately for Main/Stage-II Examination (Conventional type Paper-I and Paper-II).
IES Syllabus for ECE Prelims Exam
IES ECE Syllabus For Basic Electronics Engineering:
Basics of semiconductors; Diode/Transistor basics and characteristics; Diodes for different uses; Junction & Field Effect Transistors (BJTs, JFETs, MOSFETs); Transistor amplifiers of different types, oscillators and other circuits; Basics of Integrated Circuits (ICs);
Bipolar, MOS and CMOS ICs; Basics of linear ICs, operational amplifiers and their applications-linear/non-linear; Optical sources/detectors; Basics of Optoelectronics and its applications.
IES ECE Syllabus For Basic Electrical Engineering:
DC circuits ohm’s & Kirchoff’s laws, mesh and nodal analysis, circuit theorems; Electromagnetism, Faraday’s & Lenz’s laws, induced EMF and its uses; Single-phase AC circuits; Transformers, efficiency; Basics-DC machines, induction machines, and synchronous machines; Electrical power sources- basics: hydroelectric, thermal, nuclear, wind, solar; Basics of batteries and their uses.
IES ECE Syllabus For Materials Science:
Electrical Engineering materials; Crystal structure & defects; Ceramic materials-structures, composites, processing and uses; Insulating laminates for electronics, structures, properties and uses; Magnetic materials, basics, classification, ferrites, Ferro/paramagnetic materials and components; Nano materials-basics, preparation, purification, sintering, nanoparticles and uses; Nanooptical/magnetic/electronic materials and uses; Superconductivity, uses.
IES ECE Syllabus For Electronic Measurements and Instrumentation:
Principles of measurement, accuracy, precision and standards; Analog and Digital systems for measurement, measuring instruments for different applications; Static/dynamic characteristics of measurement systems, errors, statistical analysis and curve fitting; Measurement systems for non-electrical quantities; Basics of telemetry; Different types of transducers and displays; Data acquisition system basics.
IES ECE Syllabus For Network Theory:
Network graphs & matrices; Wye-Delta transformation; Linear constant coefficient differential equations- time-domain analysis of RLC circuits;
Solution of network equations using Laplace transforms- frequency domain analysis of RLC circuits; 2-port network parameters driving point & transfer functions; State equations for networks; Steady state sinusoidal analysis.
IES ECE Syllabus For Analog and Digital Circuits:
Small signal equivalent circuits of diodes, BJTS and FETs; Diode circuits for different uses; Biasing & stability of BJT & JFET amplifier circuits; Analysis/design of amplifier- single/multi-stage; Feedback& uses; Active filters, timers, multipliers, wave shaping, A/D-D/A converters; Boolean Algebra& uses; Logic gates, Digital IC families, Combinatorial/sequential circuits; Basics of multiplexers, counters/registers/ memories /microprocessors, design& applications.
IES Syllabus for ECE Mains Exam
IES ECE Syllabus For Analog and Digital Communication Systems:
Random signals, noise, probability theory, information theory; Analog versus digital communication & applications: Systems- AM, FM, transmitters/receivers, theory/practice/ standards, SNR comparison; Digital communication basics: Sampling, quantizing, coding, PCM, DPCM, multiplexing-audio/video; Digital modulation: ASK, FSK, PSK; Multiple access: TDMA, FDMA, CDMA; Optical communication: fibre optics, theory, practice/standards.
IES ECE Syllabus For Control Systems:
Classification of signals and systems; Application of signal and system theory; System realization; Transforms& their applications; Signal flow graphs, Routh-Hurwitz criteria, root loci, Nyquist/Bode plots; Feedback systems-open &close loop types, stability analysis, steady-state, transient and frequency response analysis; Design of control systems, compensators, elements of lead/lag compensation, PID and industrial controllers.
IES ECE Syllabus For Computer Organization and Architecture:
Basic architecture, CPU, I/O organisation, memory organisation, peripheral devices, trends; Hardware /software issues; Data representation& Programming; Operating systems-basics, processes, characteristics, applications; Memory management, virtual memory, file systems, protection & security; Databases, different types, characteristics and design; Transactions and concurrency control; Elements of programming languages, typical examples.
IES ECE Syllabus For Electro Magnetics: Elements of vector calculus, Maxwell’s equations-basic concepts; Gauss’, Stokes’ theorems; Wave propagation through different media; Transmission Lines-different types, basics, Smith’s chart, impedance matching/transformation, S-parameters, pulse excitation, uses; Waveguides-basics, rectangular types, modes, cut-off frequency, dispersion, dielectric types; Antennas-radiation pattern, monopoles/dipoles, gain, arrays-active/passive, theory, uses.
IES ECE Syllabus For Advanced Electronics Topics:
VLSI technology: Processing, lithography, interconnects, packaging, testing; VLSI design: Principles, MUX/ROM/PLA-based design, Moore & Mealy circuit design; Pipeline concepts & functions; Design for testability, examples; DSP: Discrete-time signals/systems, uses; Digital filters: FIR/IIR types, design, speech/audio/radar signal processing uses; Microprocessors & microcontrollers, basics, interrupts, DMA, instruction sets, interfacing; Controllers & uses; Embedded systems.
IES ECE Syllabus For Advanced Communication Topics:
Communication networks: Principles /practices /technologies /uses /OSI model/security; Basic packet multiplexed streams/scheduling; Cellular networks, types, analysis, protocols (TCP/TCPIP); Microwave & satellite communication: Terrestrial/space type LOS systems, block schematics link calculations, system design; Communication satellites, orbits, characteristics, systems, uses; Fibre-optic communication systems, block schematics, link calculations, system design.
Now that you are provided with all the necessary information regarding IES ECE Syllabus. Candidates are advised to schedule themselves with a proper preparation plan and prepare accordingly.
We hope this detailed article on IES ECE Syllabus is helpful. If you have any query regarding this article or IES Syllabus for ECE, kindly drop your comments in the comment box below and we will get back to you as soon as possible.
Embibe wishes you all the best for your examination.