CG PET Exam Pattern 2023 – The Chhattisgarh Professional Examination Board will release the CG PET 2023 exam pattern on its official website. The candidates who apply for the exam must be aware of the CG PET exam pattern and syllabus for better preparation. The exam pattern contains the details pertaining to the question paper like time duration of the exam, total number of questions, types of questions, section wise distribution of marks and time etc.

The subjects that come under CG PET syllabus are Physics, Chemistry and Mathematics of 12^th standard. The candidates must read carefully about the topics and sub-topics included in the syllabus and ensure not to leave any of the topics while preparing for the exam. CG PET 2023 exam Pattern and syllabus will be quite helpful for the aspirants to score high in the examination. This article discusses the complete exam pattern and syllabus of CG PET 2023 and the preparation tips.

CG PET Exam Pattern 2023

CG PET 2023 exam pattern will be released in April 2023. Knowing about CG PET 2023 exam pattern and syllabus is highly important for the applicants as they will better apprehend the exact layout of the question paper in advance. The table given below discusses the exam pattern of CG PET 2023:

CG PET Paper Pattern

Particulars	Details
Mode of Exam	Offline or Pen-paper based
Type of Questions	MCQs or Multiple-choice questions
Time Duration	3 hours
Number of Questions	150
Total Marks	150
Sections	There are three sections in the paper Physics- 50 Questions Chemistry- 50 Questions Mathematics- 50 Questions
Marking Scheme	For every right answer, one mark will be granted
Negative Marking	There is no provision of negative marking in the exam.

CG PET Syllabus 2023

CG PET 2023 syllabus consists of the topics from the subjects Physics, Chemistry and Mathematics. The detailed syllabus of CG PET 2023 is mentioned below:

CG PET Physics Syllabus

The following topics and sub-topics are covered under Physics:

1. Measurement: Units and dimensions, Dimensional analysis, Fundamental and derived units, S.I. Units.
2. Kinematics: Linear motion in one and two dimensions, General relation among position and velocity, Cases of uniform velocity and uniform acceleration, Uniform circulation motion.
3. Force and Laws of Motion: Newton”s law of motion, Force and inertia, Conservation of momentum and energy, Static and Kinetic friction, Uniform Circular motion
4. Rotational Motion and Moment of Inertia: Rigid body rotation, torque, couple, angular momentum, Moment of inertia, conservation of its momentum, theorems of parallel and perpendicular axis, (Moment of inertia of uniform ring, disc thin rod and cylinder only).
5. Gravitation: Acceleration due to gravity and its variation, motion of satellites, Universal law of gravitation, escape velocity, Synchronous satellite and polar satellite.
6. Work, Energy and Power: Work done by force, energy, power, Potential energy, Elastic collisions, Potential energy of a spring, Gravitational potential energy and its angular conversion to kinetic energy.
7. Properties of Solid and Fluids: Elasticity, Young’s modulus, Hook’s law, shear and bulk modulus, surface energy and surface tension, fluid pressure, atmospheric pressure, viscosity of fluids, kinetic theory of gases, gas laws, kinetic energy and temperature.
8. Oscillation: Periodic motion, Oscillations in spring, simple harmonic motion, Laws of simple pendulum.
9. Light: Wave nature of light, Young’s double slit experiment, Interference, velocity of light and Doppler’s effect in light, refraction, Reflection, total internal reflection, Lenses, curved mirrors, mirror and lens formulae, absorption and emission specoa, Dispersion in prism, Optical instruments. defects of vision, human eye, magnification and resolving power of telescope and microscope.
10. Waves: Transverse and longitudinal wave motion, principle of super position, Speed of sound, beats and Doppler effect, progressive and stationary waves.
11. Electrostatics: Coulomb’s law of electrostatics, electric field and potential due to a point charge, dielectric constant, Guass’s law in simple geometric, dipole, dipole field. Electrostatic potential,  parallel plate and spherical capacitors, capacitance, energy of a capacitor, capacitors in series and parallel.
12. Magnetism: Bar magnet, torque on a bar magnet due to magnetic field, lines of force, earth’s magnetic field, vibration magnetometer, Paramagnetic, tangent galvanometer, di magnetic and ferromagnetic substances.
13. Heat and Thermodynamics: Heat, Thermometers, Temperature, Specific heats at constant volume and constant pressure, Mechanical equivalent of heat isothermal and adiabatic processes, Heat conduction in one dimension, Stefan’s law and Newton’s law of cooling, Convection and radiation, Zeroth, First and Second law of thermodynamics.
14. Current Electricity: Electric current, resistances in series and parallel, temperature dependence of resistance, Ohm’s law, Kirchhoff’s laws,  wheat stone bridge, and potentiometer, Measurement of voltages and currents.
15. Effect of Electric Current: Magnetic thermal and chemical effect of current, chemical effects and law of electrolysis, Electric power heating effects of currents, thermoelectricity, Magnetic fields due to a straight wire, circular loop and solenoid, Biot-Savart law, Force on a moving charge in a magnetic field (Lorentz force), effect of a uniform magnetic field of a current loop, Magnetic moment of a current loop, forces between two currents; moving ammeter, galvanometer and voltmeter.
16. Electromagnetic Induction and Alternating Current: Electromagnetic induction induced emf Faraday’s law, Lenz’s law, Magnetic flux, self and mutual inductance, Alternating currents impendence and reactance growth and decay of current in L-R circuit, elementary idea of dynamo and transformer.
17. Electron, Photon and Radio Activity: Bohr model of the atom, Composition of nucleus, atomic masses and isotopes, Hydrogen spectrum, radioactivity, decay constant, half-life and mean life, laws of radioactive decay, Mass-energy relation, fission, X-Ray : properties and uses.

CG PET Chemistry Syllabus

Below topics are covered in Chemistry subject:

1. Atomic Structure: Constitution of nucleus, quantum numbers aufbau principle electronic configuration of elements (up to-Kr, Bohr’s atom model, De-Broglie relation, shapes of orbital.
2. Solid State: Crystal lattices, Structure of ionic compounds close packed structure, unit cells, Ionic radii, properties of solids, imperfections (Point defects).
3. Solutions: Modes of expressing concentrations of solutions, Raoults law of colligative properties, Types of solutions, non-ideal solution, and abnormal molecular weights.
4. Chemical Bond: Electrovalent covalent and co-valent bonds, hydrogen bond, hybridization (sp):, shapes of molecules (VSEPR theory), Elements of VBT, bond polarity resonance.
5. Chemical Equilibrium: Chemical equilibrium, Le Chatelier principle and its applications, Law of mass action Kp and Kc.
6. Nuclear Chemistry: Radioactive radiations, radioactive decay, Half-life, group displacement law, Nuclear reactions, structure and properties of nucleus, disintegration series, Isotopes and their uses, artificial transmutation,  Radio-carbon dating.
7. Ionic Equilibrium: Ionic Equilibrium in solutions, common ion effect, Solubility product, theories of acids and base hydrolysis of salts : pH : buffers
8. Thermo Chemistry and Thermodynamics: Energy changes during a chemical reaction intrinsic energy, First law of thermodynamics, enthalpy, Hess’s law, heats of reactions, Second law of thermodynamics, energy, entropy, spontaneity of a chemical reaction, energy as energy available for useful work, energy change and chemical equilibrium.
9. Chemical Kinetics: Rate of a reaction, factors affecting the rate, mte constant, rate expression, order of reaction, Arrhenous equation, first order rate constant-expression and characteristics.
10. Electro chemistry: Oxidation number and ion-electron methods, Oxidation, Electrolytic conduction, voltaic cell, Faraday’s laws, electrode potentials, Gibb’s energy and cell potentials, electromotive force, Nernst equation, fuel cell, commercial cells, electrochemical theory of corrosion.

Inorganic Chemistry Syllabus

Go through the below topics that come under Inorganic Chemistry:

1. Principles of Metallurgical Operations: Furnaces, extraction, ore concentration, purification metallurgies of Na, Al, Fe, Cu, Ag, Zn and Pb and their properties.
2. Chemical Periodicity: s, p, d, and f-block elements, periodicity, periodic Table, atomic and ionic radii valence, electron affinity, ionization energy, metallic character, electro negativity
3. Transitions Metals: Electronic configuration of 3r‘Metal ions, other general characteristic properties, potassium dichromate, oxidation states, potassium permanganate.

Organic Chemistry Syllabus

Read the below given topics under Organic Chemistry syllabus:

1. Chemistry of Hydro Carbon: Calculation of empirical and molecular formulae of organic compounds,  common functional groups, Nomenclature of organic compounds, isomerism, alkenes and benzene, Structure and shapes of alkenes, Preparation, properties and uses of alkanes, alkenes and alkynes,  petroleum, benzene, cracking, gasoline additives, octane number.
2. Organic Compounds Containing Organic Oxygen: Nomenclature, Chemical properties, methods preparation, correlations of physical properties with structures and uses of Amino, Nitro, Cyan and Diaz compounds.

CG PET Mathematics Syllabus

The mathematics syllabus includes the below-given topics:

1. Algebra: Algebra of complex numbers, modulus and argument of complex numbers, Graphical representation of complex numbers, Square mysqladmin of a complex number, Cube mysqladmins of unity, Triangular inequality, geometric and harmonic progression , Sum of squares and cubes of first Natural numbers, relations between mysqladmins and coefficients, Quadratic equations, permutations and combinations, binomial Theorem (any index) exponential and logarithmic series, Matrices, types of matrices, Determinants up to third order and their order and their elementary properties, elementary properties of matrices, ad joint and inverse of matrix, Partial fraction,  Application in solving simultaneous equations up to three variables
2. Trigonometry: Trigonometry functions and their graphs, addition and subtraction, general solutions of triangles equations, Formula involving multiple and submultiples angles, Relations between sides and angles of a triangles, inverse, Solutions of triangles, trigonometrically functions, height and distance.
3. Co-Ordinate Geometry of Two Dimensions: Rectangular Cartesian co-ordinates, distance of a point from a line angle between two lines, Straight-line pair to straight line, tangents, Circle and normal system of circles, Corrie section Parabola, Hyperbola and Ellipse in standard forms with elementary, properties tangents.
4. Integral Calculus: Integrations as the inverse process of differentiations, Definite integral, Integration by the parts, by substitution and by partial fraction, Areas under simple cures.
5. Co-ordinate Geometry of Three Dimensions: Direction cosine and direction ratios, Rectangular co-ordinate system, equation of place in standard forms, equation of a line angle between two lines, Perpendicular distance from a point.
6. Differential Calculus: Function polynomial, logarithmic and exponential, rational trigonometric,  Inverse function, differentiation of rational, Limit continuity and differentiability of functions,  trigonometric and exponential functions, Application of derivative in elementary problems in mechanics increasing and decreasing functions, Roll’s theorem and mean value theorem, Maxima and Minima of function of one variable.
7. Vector Algebra: Definition of vector, Components in three dimensional space, addition of vectors, Scalar and vector products,Triple products, Simple application in geometry and mechanics.
8. Statistics: Probability addition and multiplication laws, binomial distribution, conditional probability, Simple problems in correlation and regression.
9. Differential Equations: Formulation of differential equation, order and degree, Homogeneous linear differential equation of first order, Solutions of differential equations by separation of variable method.
10. Numerical Methods: Solution of equation by the method of bisection, Newton-Raphson, false positions, Numerical integration by trapezoidal and Simpson Rule’s.
11. Information Technology: Basics of Computer and its operations, main parts of computer, Functional Components, input devices, output devices, and secondary storage devices, utility software, system software, application software.

Preparation Tips for CG PET 2023

The applicants are advised to go through the CG PET exam pattern and syllabus before making up their minds for preparation. Read the below-given tips to prepare well for the exam:

1. A proper study plan is the foremost step of exam preparation, and one must stick to the same
2. Revise the topics regularly or frequently as this will help you to understand the concept
3. Refer to the books suggested by the experts for proper understanding
4. Practice for speed tests at home to ensure that you complete the exam within the given time
5. Solve the question papers of previous years and also give online mock tests to check your level of preparation

FAQs About CG PET Exam Pattern

Here are the most frequently asked questions about CG PET Exam Pattern:

We hope that this information on CG PET Exam Pattern and Syllabus has helped you. If you have any queries, you can ask us, and we will answer you.

Stay tuned to embibe.com to get the latest updates on CG PET Exam Pattern 2023.